| |

Loudspeakers for SPL 12-2

Loudspeaker LS 20/8

Loudspeaker LS20/8 convinces by its warm, natural sound and is suitable for mounting or setup. A readily converted cable may be supplied upon customer request.

Technical Data:
Frequency response : 130-20 000 Hz
Maximum power : 15 W / 8 Ohm
Exterior dimensions : Ø 80 x 37 mm
installation dimensions:: Ø 75 x 37 mm
Magnet : Ø 60 mm

Order No.: 249655 Dimension Diagram

Loudspeaker LS 15

Loudspeaker LS 15 is especially suitable for mounting in little space available (width 50 mm). Both mounting and setup are possible. A preassembled cable may be supplied upon customer request.

Technical Data:
Frequency response : 130-20 000 Hz
Maximum power : 15 W / 8 Ohm
Exterior dimensions : 90,5 x 50,5 mm
installation depth : 45 mm
Magnet : Ø 48,5 mm

Order No.: 249655 Dimension Diagram

Loudspeaker LS 20 WP

LS 20 WP offers the perfect solution for exterior areas or moist environments. It is water proved and requires only little mounting space (installation depth 29 mm). A preassembled cable may be supplied upon customer request.

Technical Data:
Maximum power: 20 W / 8 Ohm
Exterior dimensions : Ø 85,5 x 29 mm
installation depth : 29 mm
Frequency response: (-10 dB) 180-10000 Hz
Mean sound pressure level: 87 dB (1W/1m)

Order No.: 249655 Dimension Diagram

Loudspeaker Faceplate

For mounting of the LS 20/8 loudspeaker into a tableau, we supply a matching stainless steel faceplate (surface polished 180 grain) with stud bolts on the rear side for fastening of the speaker.

Exterior dimensions L x W x H 100 x 100 x 19

Order No.: 249658




Accessories   Extension   Inquiry   Address