Segmented Display AS01

Individually programmable Floor indicator
Font size 30 mm / 16 - Segment
Fluorescent colours red, green
Additional connection for indication of driving direction SA35-PF
Especially narrow design for door case installation

Controls :
Graycode, 1 out of N, Binarycode
Supply Voltage:
12 - 24 V / DC
Power consumption:
without Arrow SA 35-PF = 12V approx. 90mA / 24V approx. 70mA
with Arrow SA 35-PF = 12V approx. 130mA / 24V approx. 100mA
Connection:
Screw connectors , Ribbon cable / 16 pin,
RJ45 (Patch-) cable, 8 pin + shield, Cat 5
Ribbon cable / 10 pin for SA 35-PF

Display is mounted by 2 welded-stud fasteners M 3 x 30 on the rear of the face plate.
Thickness of face plate: 2 mm

Pin configuration
FBK
16 pin  		 Pin configuration Screw connectors Signal Graycode Max. 49 Stops Signal 1 out of N Max.
8 Stops 		Pin configuration RJ 45 Signal Graycode 15 Stops
1 1 Graycode A picture 1 1=Graycode A
2 2 Graycode B picture 2 2=Graycode B
3 3 Graycode C picture 3 3=Graycode C
4 4 Graycode D picture 4 4=Graycode D
5 5 Graycode E picture 5  
6 6 Graycode F picture 6  
7 UP Arrow up Arrow up 5=Arrow up
8 DN Arrow down Arrow down 6=Arrow down
9 - Minus (-) Minus (-) 7=Minus (-)
10 + Plus (+) Plus (+) 8=Plus (+)
11 7   picture 7  
12 8   picture 8  
Pin 13 - 16 = not connected
If a 2 digit floor and a driving direction display is required, please add the arrow display SA 35-PF


 

 

 

 

 

Pin configuration Ribbon cable 10 pin Connection SA 35-PF 7 = Arrow up 9 = Minus (-)
8 =  Arrow down 10 = Plus (+)

 

16 Seg. Anzeige AS 2x16-30
  freely-programmable , double digit , 30mm  		Red AS0101
Green AS0102

 

Dimension Diagram

Cover plate cut-out
Installation depth with standard connection min. 45 mm

Datasheet